The RCS/4000 product family may be used in the Windows/NT environment to provide RAS dial in access, dial-out access through telnet, TCP/IP routing over a WAN and other terminal server and routing functions.

NativeCOM Ports under DOS

Assuming that your system has two native serial ports called COM1 and COM2, the NativeCOM Ports will start at COM3

• 4 port RCS/3000
  -  the additional COM ports will be COM3-COM6.
• 8 port RCS/4000
  -  the additional COM ports will be COM3-COM10.
• 16 port RCS/4000
  -  the additional COM ports will be COM3-COM18.

TFTP

If your NT server is configured as a TFTP server, you can download configurations and new software to the RCS/4000 through that server. A shareware version for Windows NT has been tested and found to work with the RCS/4000.

After reviewing this application note, if you have questions or require additional information, please contact our technical support group at This e-mail address is being protected from spambots. You need JavaScript enabled to view it .